ESTANE S180A TPU
Type: ESTANE庐 S180A is a Shore 83A, polyester based thermoplastic polyurethane (TPU). Uses: Injection Molding, Extrusion Physical Properties Standard No. Units Value Hardness ASTM D2240 Shore A 83 Specific Gravity ASTM D792 g/cm3 1.20 Mechanical Tensile Stress: ASTM D412 kgf/cm2 At *** elongation 45 At 300% elongation 90 Tensile Strength ASTM D412 kgf/cm2 350 Ultimate Elongation ASTM D412 % 770 Tear Resistance (Die C) ASTM D624 kgf/cm 90 Abrasion Loss ISO 4649 mm3 30 Compression Set ASTM D395 At 23掳C X22hr % 15 At 70掳C X22hr % 35 Mold Shrinkage ASTM D955 m/m 0.020 Thermal Vicat Softening Temperature ASTM D1525 掳C 85 *Test samples were annealed at 100oC and 24 hours at room temperature before testing. **These are typical values and should not be used for specifications. Injection Molding Guide These settings are to be used only as a guide. This is a typical injection molding temperature profile ba |
|
手机站
您当前位置是：产品大全 >> 橡胶塑料 >>
塑料原料
免责声明：以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，www.qy6.com对此不承担任何责任。如有侵犯您的权益，请来信通知删除。
联系信息
