用于双光子显微镜系统，控制钛蓝宝石激光器光强的电光调制器
关键词：双光子显微镜 电光调制器 Conoptics，双光子显微镜功率调节系统
Conoptics是光学和激光附件制造业的先驱，开发了一套用于多光子显微镜的电光调制器。
多光子荧光显微镜结合了先进的激光扫描显微镜技术，使用红外波长获取更高分辨率的三维图像，多光子荧光显微镜是非常实用的研究工具。
Conoptics调制器采用KD*P晶体，光束从中心入射，中心出射，标准的波长范围从700nm到1100nm。电源使用Model 302RM，拥有1us的上升和下降沿的时间，可作为一个250KHz高速开关，并且可作为一个强度调制器。
调制器参数：
Aperture
3.5mm
Dimensions
50mm Diameter * 135mm
Transmission
>90%
Standard Wavelength Ranges
700-1100nm
Piezo Resonances
Minimal with clamped version(BK option)
Driver Compatibility
Full modulation with M302 Power Amplifier up to 1064nm
放大器参数：
Cabinet
Driver and power supply in single cabinet
Test Feature
Built-in test feature allows testing for max transmission of Pockel Cell with out adjusting bias voltage
DC Bias
Improved DC biasing of Pockel Cell provides greater linearity at higher bias voltages
Voltage Range
+/- 450VDC controlled by ten-turn front panel pot. Digital meter monitors differential bias applied to E.O. Modulator
Linearity
10bits referenced to full scale (.1%)
Bandwidth
DC to >200Khz with 90pf load and 3M (RG-62) cables
Max. Output Drive Level
750VP-P into 90pf load
Amplifier Input Signal
2VP-P max into 50/1K ohms delivers 750VP-P out
Input Signal Format
Options include Unipolar positive, negative or bipolar
Input Power (AC)
60W typical. Input power is both load (modulator) and frequency dependent.
Dimensions
19” Rack Mountable, 5.25”H(133mm) (3U) x 14”D (356mm)
Cooling
Forced air
Operating Environment
Designed for laboratory use (indoor only)
Temperature range +5deg C to +50deg C ambient
Humidity 20%-80% RH up to 32deg C
Altitude <3000M
Weight
20lbs (9.07kg) |
 |
|
手机站
您当前位置是：产品大全 >> 电子元器件 >>
其他未分类
免责声明：以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，www.qy6.com对此不承担任何责任。如有侵犯您的权益，请来信通知删除。
联系信息