汉高汉高乐泰乐泰 HF 8015
技术服务热线：021-51693135 / 021-22818476
乐泰 STYCAST EO 8015 liquid epoxy encapsulant is ideal for potting small components.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Viscosity @ 25 °C, mPa∙s (cP) 95,000
Specific Gravity, lbs/gal 1.31
Shelf Life @ -16 °C (from date of manufacture), days 180
Flash Point - See SDS
TYPICAL CURING PERFORMANCE
Gel Time
Gel @ 121oC, 20 gm mass, minutes 10
Recommended Cure Schedule
20 minutes @ 121°C
Alternative Cure Schedule
10 minutes @ 149°C
The above cure profile is a guideline recommendation. Cure conditions (time and temperature) may vary based on customers' experience and their application requirements, as well as customer curing equipment, oven loading and actual oven temperatures.
TYPICAL PROPERTIES OF CURED MATERIAL
Physical Properties
Hardness, Shore D 90
Thermal Conductivity , W/(m-K) 0.216
Electrical Properties
Volume Resistivity, ohm-cm 1×1015
Dielectric Strength, volts/mil 535
Dielectric Constant / Dissipation Factor @ 25 °C:
@ 1 KHz 4.25/0.006
@ 10 KHz 4.25/0.012
TYPICAL PERFORMANCE OF CURED MATERIAL
Shear Strength
Tensile Strength N/mm2 6.9
(psi) (1,000)
Lap Shear Strength :
on Aluminum substrate N/mm2 4.7
(psi) (681)
on Valox substrate N/mm2 2.4
(psi) (350)
on Zytel substrate N/mm2 6.2
(psi) (900)
8015液体环氧密封剂乐泰 stycast EO是理想for把小部件。
uncured材料的典型性能
粘度：25℃，mpa∙s 95000（CP）
比重1.31 /加仑，磅
大陆架的生活”- 16°C（from日期，180天制造）
See SDS闪光点
典型的固化性能
凝胶时间
“121oc凝胶，20分钟，通用汽车的质量，10
推荐的治疗计划
“121°c 20分钟
替代治疗计划
“149°c 10分钟
上述程序简介是指南推荐。（时间和温度）的治疗条件可以基于顾客体验瓦里和应用要求，as well as客户固化设备，炉负荷与实际炉温度。
典型性能的固化材料
物理性质
邵氏D硬度，90
导热，W /（mK）0.216
电气性能
体积电阻率，Ωcm 1×1015
介电强度，伏/毫米535
电介质常数/耗散因子”25°C。
|
免责声明：以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，www.qy6.com对此不承担任何责任。如有侵犯您的权益，请来信通知删除。