 |
胶水公司
| 联系人：王小姐
女士 (主管) |
| 电 话：021-51693135 |
手 机：13052326431  |
 |
|
 |
|
| 乐泰 435平板电脑/笔记本ipad专用胶水，乐泰胶水 |
乐泰 435平板电脑/笔记本ipad专用胶水，乐泰胶水
技术服务热线：021-51693135 / 021-22818476
乐泰® 435™ is a rubber toughened adhesive with increased flexibility and peel strength along with enhanced resistance to shock. The product provides rapid bonding on a wide range of materials, including metals, plastics and elastomers, as well as porous and absorbent materials like wood, paper, leather and fabric. ISO-10993 An ISO 10993 Test Protocol is an integral part of the Quality Program for 乐泰® 435™. 乐泰® 435™ has been qualified to 汉高's ISO 10993 Protocol as a means to assist in the selection of products for use in the medical device industry. Certificates of Compliance are available on 汉高's website or through the 汉高 Quality Department. Note: This is a regional approval. Please contact your local Technical Service Center for more information and clarification. TYPICAL PROPERTIES OF UNCURED MATERIAL Specific Gravity @ 25 °C 1.1 Flash Point - See MSDS Viscosity, Cone & Plate, mPa•s (cP): Temperature: 25 °C, Shear Rate: 1,000 s -1 100 to 250LMS TYPICAL CURING PERFORMANCE Under normal conditions, the atmospheric moisture initiates the curing process. Although full functional strength is developed in a relatively short time, curing continues for at least 24 hours before full chemical/solvent resistance is developed. Cure Speed vs. Substrate The rate of cure will depend on the substrate used. The table below shows the fixture time achieved on different materials at 22 °C / 50 % relative humidity. This is defined as the time to develop a shear strength of 0.1 N/mm2. Fixture Time, seconds: Steel (degreased) 30 to 45 Aluminum (Isopropanol wiped) ≤60LMS Zinc dichromate 90 to 105 Neoprene 30 to 45 Rubber, nitrile
乐泰®
435™是一种橡胶增韧粘合剂
增加柔韧性和剥离强度
耐冲击。该产品提供快速粘合
广泛的材料，包括金属，塑料和
弹性体，以及多孔和吸收材料
木材，纸，皮革和织物。
ISO-10993
ISO 10993测试协议是质量的组成部分
乐泰®计划
435™。 乐泰®
435™有 |
 |
| |
|
|
 |
|
|
免责声明：以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，www.qy6.com对此不承担任何责任。如有侵犯您的权益，请来信通知删除。