ECCOBOND CE3920电子组装/ECCOBOND CE3920电子组装/ECCOBOND CE3920电子组装/ECCOBOND CE3920电子组装/ECCOBOND CE3920电子组装/ECCOBOND CE3920电子组装/ECCOBOND CE3920电子组装/ECCOBOND CE3920电子组装/ECCOBOND CE3920电子组装/ECCOBOND CE3920电子组装/ECCOBOND CE3920电子组装/ECCOBOND CE3920电子组装/ECCOBOND CE3920电子组装/ECCOBOND CE3920电子组装/ECCOBOND CE3920电子组装/ECCOBOND CE3920电子组装/ECCOBOND CE3920电子组装/ECCOBOND CE3920电子组装/ECCOBOND CE3920电子组装/工业胶水/电子组装胶水/工业用胶
技术服务热线：021-51693135 / 021-22818476
CE-3920 is designed for fine dispense applications andSMT assembly processes. The long work life minimizesproduct waste and clean-up time, providing increasedproduction efficiency.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Viscosity, Cone & Plate, Angle 3o, mPa∙s (cP):
@ Speed 0.5 rpm 148,000
@ Speed 5 rpm 26,100
Thixotropic Index @ 25°C, Speed 0.5/5 rpm 5.7
Shelf Life @ -40°C, months 6
Flash Point - See MSDS
TYPICAL CURING PERFORMANCE
Cure Schedule
5 minutes @ 150°C (Batch Cure)
The above cure profiles are guideline recommendations. Cureconditions (time and temperature) may vary based on customers'experience and their application requirements, as well as customercuring equipment, oven loading and actual oven temperatures. Storage Store product in the unopened container in a dry location.Storage information may be indicated on the product containerlabeling.Optimal Storage: -40°C. Storage below -40°C or greaterhan minus -40°C can adversely affect product properties.
ce-3920设计用于细分配应用程序和SMT装配工艺。工作寿命长*小化产品浪费和清理时间，提供增加
生产效率。
固化材料的典型性能
粘度、锥板、3角o，MPA∙S（CP）：
@速度0.5转148000
@速度5转26100
触变指数”25°C，速度0.5/5转5.7
保质期@ 40°C，月6
闪光点看到MSDS
典型的固化性能
治疗计划
5分钟@ 150°C（间歇固化）
上述固化型材指南建议。治愈条件（时间和温度）可能因客户而异经验和他们的应用要求，以及客户
固化设备，烘箱负荷和实际烤箱温度。保管部在干燥的地方，在未打开的容器存储产品。存储信息可以在产品容器上显示标记.*佳存储：40°C存储低于40°C或更大比零下40° |
免责声明：以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，www.qy6.com对此不承担任何责任。如有侵犯您的权益，请来信通知删除。