HYSOL KL1000-3A电子胶水/塑封胶水/汉高乐泰胶水/塑封方案
技术服务热线：021-51693135 / 021-22818476
乐泰 HYSOL KL 1000-3A provides the lowest cost ofownership with superior moldability and reliability.乐泰 HYSOL KL 1000-3A meets UL 94 V-0 Flammabilityat 3.175mm thickness.TYPICAL PROPERTIES OF UNCURED MATERIALGel Time @ 175 °C, seconds 23 Spiral Flow, @ 175°C, cm 80Shelf Life:@ 5oC, days 365TYPICAL PROCESS DATAHandling
Preheat Temperature :Conventional mold, °C 80 to 100Automold, seconds 0 to 5Molding Temperature, °C 150 to 195Molding Pressure, Kg/cm2 40 to 100Transfer Time:Conventional mold, seconds 10 to 18Automold, seconds 4 to 10Curing Time, @ 175oC:Conventional mold, seconds 50 to 120Automold, seconds 50 to 80Post Cure @ 175°C, hours 4 to 6乐泰 HYSOL KL 1000-3A has been formulated to provide thebest possible moldability and as wide a molding latitude as possible.
Although molding and curing conditions will vary from situation tosituation, recommended starting ranges are shown above.StorageStore product in the unopened container in a dry location.
Storage information may be indicated on the product containerlabeling.Powder Storage - Powder or preforms should be stored at 5oCor below, in closed containers. After removal from coldstorage, the material MUST be allowed to come to roomtemperature, in the sealed container, to avoid moisturecontamination.
The suggested waiting time for a standard 15kg carton box is 24 hours
乐泰 HYSOL KL 1000-3A提供*低的拥有成本，具有出色的成型性和可靠性.
乐泰 HYSOL KL 1000-3A符合UL 94 V-0 Flammabilityat 3.175mm厚度。
固化材料的特性特性时间@ 175°C秒秒23螺旋流，@ 175°C，cm 80Shelf寿命：@5oC，天365工艺流程数据处理预热温度：常规模具，°C 80至100Automold，秒0至5模具温度，℃150至195压铸压力，Kg /cm240至100转印时间：常规模具秒10至18Auold，秒4至10℃，@ 175℃：常规模具，秒50至120Automold，秒50至80后固化@ 175°C，小时4至6乐泰 HYSOL KL 1000-3A已配制成尽可能提供可塑性和成型宽度。
尽管成型和固化条件将不同的情况，建议的起始范围如上所示。
储存产品在未开封的容器中，在干燥的位置。
储存信息可能在产品容器标签上指示。
粉末储存 - 粉末或预制件应存放在5oC以下，密闭 |
免责声明：以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，www.qy6.com对此不承担任何责任。如有侵犯您的权益，请来信通知删除。