|
胶水公司
联系人:王小姐
女士 (主管) |
电 话:021-51693135 |
手 机:13052326431 |
|
|
|
|
MULTICORE Hydro-X电子组装/工业胶水/电子组装胶水 |
MULTICORE Hydro-X电子组装/MULTICORE Hydro-X电子组装/MULTICORE Hydro-X电子组装/MULTICORE Hydro-X电子组装/MULTICORE Hydro-X电子组装/MULTICORE Hydro-X电子组装/MULTICORE Hydro-X电子组装/MULTICORE Hydro-X电子组装/MULTICORE Hydro-X电子组装/MULTICORE Hydro-X电子组装/MULTICORE Hydro-X电子组装/MULTICORE Hydro-X电子组装/MULTICORE Hydro-X电子组装/MULTICORE Hydro-X电子组装/MULTICORE Hydro-X电子组装/MULTICORE Hydro-X电子组装/MULTICORE Hydro-X电子组装/MULTICORE Hydro-X电子组装/工业胶水/电子组装胶水/工业用胶
技术服务热线:021-51693135 / 021-22818476
PRODUCT RANGE
Multicore Hydro-X cored wires are manufactured with a
flux content of 2%.
Multicore Hydro-X cored wires are available in a variety of
alloys conforming to J-STD-006 and EN 29453 or alloys
conforming to similar national or international standards.
For details refer to document “Properties of Alloys used in
Cored Solder Wires”. A wide range of wire diameters is
available.
APPLICATION
Multicore Hydro-X water soluble flux cored solder wires
are suitable for use in normal hand soldering operations
where the components have been assessed as being able to
withstand the necessary washing procedures.
Stranded wire should not be used. Strip any insulation back
so that flux residues are not trapped during the washing
process.
CLEANING
It is essential that the residues from soldering with
Multicore Hydro-X cored solder wires be removed as soon
as possible after soldering. The residues from Multicore
Hydro-X cored solder wires may be readily cleaned in
conventional equipment using water. It is important that the
cleanliness of boards and components is thoroughly
checked after soldering and cleaning. The usual procedure
is to continuously check the conductivity of the final rinse
water as a measure of ionic contamination. Samples of
cleaned boards should be subjected to a laboratory
corrosion test, insulation resistance test, or ionic
contamination assessment.
产品范围
多芯Hydro-X芯线采用a制造
焊剂含量为2%。
多芯Hydro-X芯线可用于各种
符合J-STD-006和EN 29453或合金的合金
符合 |
|
|
|
|
|
|
|