路博润ESTANE R180A TPU
Type: ESTANE? R180A is a Shore 83A, polyether type thermoplastic polyurethane (TPU). Uses: Injection Molding, Extrusion *Test samples were annealed at 100°C and 24 hours at room temperature before testing. **These are typical values and should not be used for specifications. Injection Molding Guide ? These settings are to be used only as a guide. This is a typical injection molding temperature profile based on the Test Machine (conditions based on a 75 ton machine with a general purpose screw – L/D 17 – ? 35mm). The optimal run conditions for specific equipment will vary depending on the machine and mold design. Physical Properties Value (Metric) Unit Test Method Hardness 83 Shore A ASTM D2240 Specific Gravity 1.08 g/cm3 ASTM D792 Mechanical Tensile Stress: kgf/cm2 ASTM D412 - 100 % Elongation 50 - 300 % Elongation 80 Tensile Strength 250 kgf/cm2 ASTM D412 Ultimate Elongation 790 % ASTM D412 Tear Resistance (Die C) 80 kgf/cm ASTM D624 Compression Set 35 ISO 4649 At 23°C X22hr % ASTM D395 At 70°C X22hr 15 % Mold Shrinkage 45 m/m ASTM D955 Thermal Vicat Softening Temperature 82 °C ASTM D15 |
免责声明：以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，www.qy6.com对此不承担任何责任。如有侵犯您的权益，请来信通知删除。