芯线绝缘押出机Core wire
机器特点：
■用途广:适用于导体单层绝缘押出 / Foam-Skin化学发泡双层绝缘押出 / 单层+注条绝缘押出Used abroad:Used in conductor single layer extrusion/ Foam-Skin insulation extrusion/single layer +
■产能大:优化螺杆设计,螺杆经久耐用,不粘胶,不脱铬,换色快,线速高,产能大High output:Optimization screw desgin,screw useful ,none viscose ,not escape the chromium and so on.
■品质高:押出产品同心度:93~97%;外径公差:实心+/-0.005,发泡+/-0.008;电容值:+/-0.5 High quality:The production of extrusion :Concentricity93-97%,out DIA. :±0.005,foam skin±0.008Capacitance:±0.5
■温控准:采用SCR功率控制器,配进口优质温控表,机身温度控制在+/-1℃以内 Tempreture controled :Used SCRpower control machine,with the import tempretuer control,the tempretuer of machine bodycontroled in ±1℃.
■操控易:人性化的机器设计配合友好的操作接口,机器操作更简单,更省力,更方便 Control esay: Human screen touch,operation will be more easyer,more ,and more conviniance.
■占地少:将传统的蓄线、引取、收线、计米、火花等辅机改为整体结构,布局紧凑,总长度减少5米以上Save place:tradition ,the toatel length reduce more than 5m.
机器型号
Type HT030 HT040 HT050 HT060
机器用途
Pourpose 适用于导体单层押出,Foam-Skin化学发泡双层押出,单层+注条押出
Used in conductor single layer extrusion,Foam-Skin chemical double layer extrusion,single layer+pours the strip extrusion
芯线规格
Core Specification AWG36~AWG30 AWG32~AWG28 AWG30~AWG26 AWG28~AWG20
押出材料
Extrusion material HDPE、Foam-PE、PP、PU 、PVC、SR-PVC
螺杆参数
Screw parameter 长径比:26~28 压缩比:2.7~3.2 螺杆材料:SACM眞空热处理,表面研磨镀铬抛光
L/D ratio Compression ratio :2.7-3/2 screw materail:SACM vacuum heat treatment
温控段数(机筒+机头)
Tempretuer group (Body+Head) 3+3 3+3 4+3 4+3
加热功率 6KW 8KW 11KW 15KW
主机动力
Power of main machine 7.5HP 10HP 15HP 20HP
*高产量
The highest output 30KG/H 45KG/H 60KG/H 85KG/H
*高线速
limted wire speed 300M/MIN 400M/MIN 600M/MIN 800M/MIN
活动水槽
cooling station 伸缩式活动水槽 / 恒温活动水槽,加热功率9KW,移动量500,总长度1.7M,配双段式拭水器
Extension type cooling station/ constant temperature cooling station ,heating power 9KW,emigration quantity 500,length1.7M ,with duble water
U型水槽长度
Utype cooling length 6M 8M 8M 10M
蓄线参数
Accumulate parameter Φ120~180蓄线轮,固定轮10沟+移动轮11沟,水平 / 斜式蓄线架,长度9M,蓄线量200M
Φ120-180 accumulate wheel,fix wheel 10pcs+moving wheel,standard/inclined accumulate shift ,length 9M,accumulate quantity200M
引取功率
Drum power 3HP 3HP 3HP 5HP
放线型式
Pay-off type 琴式张力被动放线 / 无轴式动力放线,摆杆滑块式张力器,设断线保护,适用于Φ300~500线轴Pay-off/none shift power take-up,oder protection,used in 300-500shift.
收线型式
Take-up type 双轴收线,光杆扁平电缆,2HP马达配变频调速,可单动/联动运转,米到停机,适用于Φ400~500线轴Double shift take-off,2HPmotor with Frequency conversion adjust speed,could be single/linkage running,machine stop with the oder meter over,suitablein 400-500shift. |
 |
|
手机站
您当前位置是：商业机会 >> 机械及行业设备 >> 其他行业设备 >> 供应30-60芯线押出机,电子线押出机
联系信息