 |
胶水公司
| 联系人：王小姐
女士 (主管) |
| 电 话：021-51693135 |
手 机：13052326431  |
 |
|
 |
|
| CATALYST 15电子组装/工业胶水/电子组装胶水/工业用胶 |
CATALYST 15电子组装/工业胶水/电子组装胶水/工业用胶CATALYST 15电子组装/工业胶水/电子组装胶水/工业用胶CATALYST 15电子组装/工业胶水/电子组装胶水/工业用胶CATALYST 15电子组装/工业胶水/电子组装胶水/工业用胶CATALYST 15电子组装/工业胶水/电子组装胶水/工业用胶CATALYST 15电子组装/工业胶水/电子组装胶水/工业用胶CATALYST 15电子组装/工业胶水/电子组装胶水/工业用胶CATALYST 15电子组装/工业胶水/电子组装胶水/工业用胶CATALYST 15电子组装/工业胶水/电子组装胶水/工业用胶CATALYST 15电子组装/工业胶水/电子组装胶水/工业用胶CATALYST 15电子组装/工业胶水/电子组装胶水/工业用胶CATALYST 15电子组装/工业胶水/电子组装胶水/工业用胶CATALYST 15电子组装/工业胶水/电子组装胶水/工业用胶CATALYST 15电子组装/工业胶水/电子组装胶水/工业用胶
技术服务热线：021-51693135 / 021-22818476
Catalyst 15 is designed as a general purpose, adhesive and is particularly useful when bonding dissimilar substrates such as metal to plastic. It is designed for use where shock and peel resistance are desired.
TYPICAL PROPERTIES OF UNCURED MATERIAL Part A Properties Catalyst 15 Viscosity @ 25 °C, map’s (cap) 225,000Specific Gravity 1.58Shelf Life @ 18 to 25°C, months 12Flash Point - See Massmart B Properties Catalyst 15Viscosity @ 25 °C, map’s (cap) 25,000Specific Gravity 0.97Flash Point - See MSDSCatalyst 15 into a clean container in the recommended ratio. Blend components by hand, using a kneading motion, for2 to 3 minutes and scrape the bottom and sides of the mixing container frequently to produce a uniform mixture.
If possible, power mix for an additional 2 to 3 minutes. Avoid high mixing speeds which could entrap excessive amounts of air or cause overheating of the mixture resulting in reduced working life.
催化剂15被设计为通用的粘合剂，
并且当粘合不同时特别有用基材如金属到塑料。
它被设计用于使用，因此需要抗震性和抗剥离性。固化材料的典型特性部分A性能催化剂15粘度@ 25°C，map’s（cap）225,000特殊重力1.58Shelf寿命在18至25°C，12个闪点 - 见Massmart B性能催化剂15Viscosity @ 25°C，map ∙s（cap）25,000特殊重力0.97闪点 - 以推荐的比例参见MSDS催化剂15进入a clean容器。
用手揉搓组分2-3分钟，经常揉捏混合容器的底部和侧面，以产生均匀的混合物。
如果可能，再混合2至3分钟。避免高混合 |
 |
| |
|
|
 |
|
|
免责声明：以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，www.qy6.com对此不承担任何责任。如有侵犯您的权益，请来信通知删除。