汉高汉高乐泰乐泰 E-214HP
技术服务热线：021-51693135 / 021-22818476
乐泰® EA E-214HP™ is a light paste, industrial grade epoxy adhesive. This one-component, no-mix, heat activated formulation develops tough, strong, structural bonds which provide excellent peel resistance and impact strength. When fully cured, the epoxy offers superior thermal shock resistance, excellent mechanical and electrical properties, and withstands exposure to a wide variety of solvents and chemicals. This product bonds to a wide variety of materials, including metals, glass, ceramics and plastics.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 °C 1.11
Viscosity, Brookfield - RVT, 25 °C, mPa•s (cP):
Spindle 7, speed 1 rpm, 2,000,000 to 3,000,000LMS
Spindle 7, speed 2.5 rpm 800,000 to 1,500,000LMS
Flash Point - See SDS
TYPICAL PROPERTIES OF CURED MATERIAL
Physical Properties:
Glass Transition Temperature ISO 11359-2, °C 120
Shore Hardness, ISO 868, Durometer D 85
Elongation, at break, ISO 527-2, % 7
Tensile Strength, ISO 527-2 N/mm2 31
(psi) (4,460)
Electrical Properties:
Dielectric Breakdown Strength,
IEC 60243-1, kV/mm
22
TYPICAL PERFORMANCE OF CURED MATERIAL
Adhesive Properties
Cured for 2 hours @ 120 °C followed by 4 hours @ 22 °C, 0 gap
Lap Shear Strength, ISO 4587:
Steel (grit blasted) N/mm2 33
(psi) (4,820)
Aluminum (acid etched & abraded) N/mm2 ≥13.8LMS
(psi) (≥2,000)
Aluminum (anodised) N/mm2 8.4
(psi) (1,220)
Stainless steel N/mm2 37
(psi) (5,340)
Polycarbonate N/mm2 10
(psi) (1,430)
Nylon N/mm2 1.2
(psi) (180)
Wood (Fir) N/mm2 5
(psi) (720)
Block Shear Strength, ISO 13445:
Epoxy N/mm2 9.2
(psi) (1,330)
Glass N/mm2 23
(psi) (3,370)
PVC N/mm2 5.2
(psi) (760)
Acrylic N/mm2 3.7
(psi) (530)
乐泰®EA e-214hp™是轻浆，工业级环氧树脂粘合剂。这一成分，不混合，热激活配方开发坚韧，坚固，结构键，提供优异的耐剥离性和冲击强度。完全固化后的环氧树脂，提供优异的抗热震性、优良的机械和电气性能 |
免责声明：以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，www.qy6.com对此不承担任何责任。如有侵犯您的权益，请来信通知删除。