|
胶水公司
联系人:王小姐
女士 (主管) |
电 话:021-51693135 |
手 机:13052326431 |
|
|
|
|
MULTICORE Hydro-X20电子组装/工业胶水/电子组装胶水 |
MULTICORE Hydro-X20电子组装/MULTICORE Hydro-X20电子组装/MULTICORE Hydro-X20电子组装/MULTICORE Hydro-X20电子组装/MULTICORE Hydro-X20电子组装/MULTICORE Hydro-X20电子组装/MULTICORE Hydro-X20电子组装/MULTICORE Hydro-X20电子组装/MULTICORE Hydro-X20电子组装/MULTICORE Hydro-X20电子组装/MULTICORE Hydro-X20电子组装/MULTICORE Hydro-X20电子组装/MULTICORE Hydro-X20电子组装/MULTICORE Hydro-X20电子组装/MULTICORE Hydro-X20电子组装/MULTICORE Hydro-X20电子组装/MULTICORE Hydro-X20电子组装/MULTICORE Hydro-X20电子组装/MULTICORE Hydro-X20电子组装/MULTICORE Hydro-X20电子组装/MULTICORE Hydro-X20电子组装/MULTICORE Hydro-X20电子组装/工业胶水/电子组装胶水/工业用胶
技术服务热线:021-51693135 / 021-22818476
Multicore Hydro-X/20 Water Soluble Flux is formulated for use
on electronic assemblies which have been designed for water
cleaning and will therefore meet the demand for those fluxes
whose residues need not be removed in CFC type cleaning
solvents
A number of safety features have been built into the
formulation of Hydro-X/20, particularly the fact that residues
after soldering do not create excessive foam in the washing
water and can be considered safe for disposal.
Cleaning: It is essential that the residues from soldering with
Multicore Hydro-X/20 flux be removed as soon as possible
after soldering. Multicore Hydro-X/20 flux residues may be
readily cleaned in conventional equipment using water. The
flux residues do not cause excessive foam in the washing
water and present no special hazard during disposal.
Properly processed and cleaned boards soldered using
Multicore Hydro-X/20 easily meet the ionic contamination
requirements of MIL-P-28809A. It is recommended that
samples from production are regularly checked to see that the
cleaning process is operating effectively.
多孔Hydro-X / 20水溶性助熔剂配方使用
在为水设计的电子组件上
清洁,因此将满足对这些焊剂的需求
其残留物不需要在CFC型清洗中除去
溶剂
已经建立了一些安全功能
Hydro-X / 20的制剂,特别是残留物的事实
焊后不要在洗涤时产生过多的泡沫
水,可以视为安全处置。
清洁:必须使用焊接的残留物
多孔Hydro |
|
|
|
|
|
|
|