本品已通过ISO2001质量管理认证
WX-TS6脱水型防锈油
一、作用
主要作用于不同行业的黑色和有色钢铁的表面防锈处理。比如：轴承防锈油，钣金，五金，紧固件，齿轮，等等。使用效果好，防锈性能强。
二、特色
可以将带水的工件放入其中，形成一层致密的保护油层，可以大大提高钢铁零件的抗锈的能力。可以解决客户盐雾试验不足的问题。还可以提供SGS专门检测报告
三、外观及特点
色泽 外观 状态 pH值 比重 粘度（50C）
浅棕色 清澈透明 液态 6.95-7.01 0.9150.02 3.956.75 mm2/s
四、使用方法
1．浸泡法：把除油好的钢铁浸入本品6-9分钟，在这里面每隔23分钟上下抖动一次。
2．刷涂法：直接把苏州脱水防锈油刷或喷在被防锈的钢铁表面。
五、注意要点
1．使用浸泡法时，油槽体底部需要有支架，并放置放水开关口和测量水位的卡口，当水位高于支架时，必须及时把底部的水给排出来。
2．采用本品的时候切勿加温，注意着火。
3．若遇到气温较冷的时候，可能会形成块状物体，此时可缓慢加热到45度，将这些块状的东西慢慢溶解，再继续使用，不会对防锈效果产生影响。
六、防腐指标检测
按照GB/H3652-27昆山防锈油湿热检验方法。
七、包装、储存
20公斤/桶的包装。防锈油的储存温度是-1036C，严谨高温、暴晒，可以长期储存不会变质。
客户说明：
1.我司生产的防锈油可以大大提高盐雾时间，还可以为客户提供SGS检测报告
2.上海路丰助剂有限公司生产的昆山脱水防锈油质量稳定，消耗量小，做出来的产品效果好，长期以来一直得到客户的好评。
3.前处理是非常关键的一部，如果前处理不好会对磷化有很大影响。
4.苏州脱水防锈油前处理主要包括除油，酸洗等工序，比方说如果除油不彻底，可能导致的是黑色磷化膜便面有花斑。
5.着色前必须水洗，而且需要注意的是着色剂千万不能加热，很有可能导致着色剂不稳定，甚至出现报废的可能。
6.着色剂时间也不要太长，看见有一层黑膜就可以了，否者可能会导致黑磷化掉膜。
7.有人说我们的高温发黑操作简单，看起来美观。但是它能耗大，效率低下，特别是耐腐蚀性很差，盐雾时间只能达几个小时，最多就十几个小时。
8.发黑和我们的黑色锰系磷化盐雾时间是没法比的，我们可以达到72小时，
9.现在一些汽车零部件严禁使用发黑工艺，采用锰系磷化，特别是老外他们一般都要求磷化处理。
10.有些人说我们苏州脱水防锈油价格不便宜，但我想说一分钱一分货。
11.我们的磷化液配水后要加碳酸钠中和一部分磷酸盐。这是因为我们的黑色磷化液浓度高，以后消耗量也低。
12.一般老客户只要用了我们的产品就不会换了。昆山脱水防锈油厂家他们知道我们，信任我们。
13.我们的客户遍及全国各大城市，特别是江浙沪等工业较为发达的地方。
14.我们可以为客户提供小样先试
1. Our production of rust-preventative oil can greatly improve the salt fog time, can also provide for the customer SGS test report
2. Shanghai road feng auxiliaries co., LTD. Is the production of kunshan dehydration rust-preventative oil stable quality, consumption is small, to make the product effect is good, has long been have won high appreciation among our customers.
3. Pretreatment is very key part, if pretreatment is bad to can has a great influence on phosphate.
4. Suzhou dehydration rust-preventative oil pretreatment including except oil, acid pickling process such as, say, if oil removing not thoroughly, can lead to a black phosphating film and surface has spots.
5. Must be washed before coloring, and need to pay attention to is stain mustn't heating, is likely to lead to stain is not stable, appear even scrapped may.
6. Coloring time also do not want too long, and, behold, there came a layer of black film, no person may result in black phosphating off membrane.
7. Some say our high temperature nigrescence simple operation, it looks beautiful. But its energy consumption is large, inefficient, especially corrosion resistance is very poor, salt fog time can only for hours, at most, 10 hours.
8. Black and our black manganese series phosphate salt fog time is can't ratio, we can reach 72 hours,
9. Now some parts of the car it is strictly prohibited to use black technology, using manganese series phosphating, especially foreigners they generally require phosphating.
10. Some people said we suzhou dehydration rust-preventative oil price is not cheap, but I want to say a penny a points cargo.
11. Our phosphating liquid water distribution after add sodium carbonate neutralization part of phosphate. This is because our black phosphating solution concentration is high, the later consumption is also low.
12. General and old customers as long as used our products will not change. Kunshan dehydration rust-preventative oil factory they know us, trust us.
13. Our customers all over the country's major cities, especially in jiangsu, and other industrial more developed place.
14. We can provide for the customer small kind try first |
免责声明：以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，www.qy6.com对此不承担任何责任。如有侵犯您的权益，请来信通知删除。