汉高汉高乐泰乐泰 MS 930
技术服务热线：021-51693135 / 021-22818476
乐泰® MS 930™ is a low modulus, flexible adhesive used for elastic sealing on various substrates. It is a one component sealant based on a modified silane polymer, which cures by reaction with moisture to a soft elastomeric thermoset product. The skin formation and curing times are dependent on humidity, temperature, and joint depth. By increasing the exposure to moisture these times can be reduced.
乐泰® MS 930™ is non-corrosive and free of solvents, isocyanates, silicones, PVC, and is odorless. It demonstrates good adhesion to a wide variety of substrates and is compatible with suitable paint systems. The sealant also demonstrates good UV resistance and can therefore be used for interior and exterior applications.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Density, ISO 2811-1 @ 22 °C, g/ml 1.44 to 1.5LMS
Flash Point - See MSDS
TYPICAL CURING PERFORMANCE
Under normal conditions, the atmospheric moisture initiates the curing process. The product develops functional strength in 24 hours and fully cures in 7 days.
Skin Over Time
Skin over time is the time the surface of the adhesive forms a skin upon exposure to atmospheric moisture at 25 ± 2 °C, 50 ± 5% RH. Skin Over Time, minutes 10 to 40LMS
乐泰®MS 930™是低模量，用于各种基材的密封软粘弹性。它是基于改性硅烷聚合物一一组分密封胶，其治疗反应与水分软橡胶热固性产品。皮肤的形成和固化时间取决于湿度，温度和关节深度。通过增加水分暴露，这些时间可以减少。
乐泰®MS 930™无腐蚀性、无溶剂、异氰酸酯、有机硅、PVC、和无味。它表现出良好的附着力，以各种各样的基板，并与合适的油漆系统兼容。该密封剂还表现出良好的抗紫外线性能，因此可用于内部和外部应用。
固化材料的典型性能
密度、ISO 2811-1 @ 22°C，g／ml 1.44 1.5lms
闪光点看到MSDS
典型的固化性能
在正常情况下，大气湿度开始固化过程。产品在24小时内发挥功能强度，并在7天内完全治愈。
皮肤上
随着时间的推移，皮肤表面暴露于大气湿度为25°C 2°C，50°C时，皮肤表面形成时间。皮肤上，10分钟40l |
免责声明：以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，www.qy6.com对此不承担任何责任。如有侵犯您的权益，请来信通知删除。