乐泰 3703电子组装/乐泰 3703电子组装/乐泰 3703电子组装/乐泰 3703电子组装/乐泰 3703电子组装/乐泰 3703电子组装/乐泰 3703电子组装/乐泰 3703电子组装/乐泰 3703电子组装/乐泰 3703电子组装/乐泰 3703电子组装/乐泰 3703电子组装/乐泰 3703电子组装/乐泰 3703电子组装/乐泰 3703电子组装/乐泰 3703电子组装/乐泰 3703电子组装/乐泰 3703电子组装/乐泰 3703电子组装/乐泰 3703电子组装/乐泰 3703电子组装/乐泰 3703电子组装/乐泰 3703电子组装/乐泰 3703电子组装/工业胶水/电子组装胶水/工业用胶
技术服务热线：021-51693135 / 021-22818476
乐泰 3703 is primarily designed for bonding rigid andflexible PVC to polycarbonate where large gap filling capabilities (0.25mm) and a flexible joint are desired. Itsflexibility enhances the load bearing and shock absorbing characteristics of the bond area.
The product has shownexcellent adhesion to a wide variety of substrates includingglass, many plastics and most metals.
The thixotropic nature of乐泰 3703 reduces the migration of liquid product afterapplication to the substrate.
TYPICAL PROPERTIES OF UNCURED MATERIALSpecific Gravity @ 25 °C 1.12Viscosity, Brookfield - HBT, 25 °C, mPa•s (cP):Spindle TB, speed 10 rpm, Helipath 18,000 to 35,000LMS
Cure rate andultimate depth of cure depend on light intensity, spectraldistribution of the light source, exposure time and light transmittance of the substrate through which the light mustpass.Fixture TimeUV fixture time is defined as the light exposure timerequired to develop a shear strength of 0.1 N/mm2.UV Fixture Time, Glass microscope slides, seconds:6 mW/cm2, measured @ 365 nm ≤10LMSStorageStore product in the unopened container in a dry location.
Storage information may be indicated on the product containerlabeling.
Products shall be maintained at temperaturesbetween 8°C to 28°C unless otherwise labeled, or,specified.
Storage, at temperatures below 8°C, or, greaterthan 28°C, is not recommended.
Temperatures below 8°Cand above 28°C can adversely affect product properties.
乐泰 3703主要设计用于将刚性和柔性PVC粘合到具有大间隙填充的聚碳酸酯中能力（0.25mm）和柔性接头 |
免责声明：以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，www.qy6.com对此不承担任何责任。如有侵犯您的权益，请来信通知删除。